Product Technical Bulletin
I Auto Magic Home   I   Training Home    I    Product Technical Bulletins    I    Buy 16 oz.    I    MSDS   I    E-mail Us    I
PRODUCT NAME:  #110 Power Cut Plus™       
                            

#110A Power Cut Plus™
Buy It 

PRODUCT CATEGORY:  WAXES, GLAZES & COMPOUNDS

PRODUCT DESCRIPTION:  Power Cut Plus™ is a fast cutting compound for removing heavy oxidation, acid rain spots, and car wash scratches. Safe for use on clearcoat and conventional paint finishes. May be applied by hand or a variable speed polisher. Works well with wool or foam cutting pads.

DIRECTIONS:  SHAKE WELL. For hand application, use a wax applicator in overlapping, back-and-forth motions. Allow to haze, then remove with a soft, terry towel. For machine application, apply to a small area and buff, at low to medium rpm, to desired results. Remove excess with a soft, terry towel.

DIRECTIONS: SHAKE WELL. For hand application, use a wax applicator in overlapping, back-and-forth motions. Allow to haze, then remove with a soft, terry towel. For machine application, apply to a small area and buff, at low to medium rpm, to desired results. Remove excess with a soft, terry towel.

ONLINE AVAILABLE SIZE: 16 oz. (additional sizes available through your local Auto Magic® distributor. Call 800-826-0828 or click here for more information)

SURFACE APPLICATIONS:  Power Cut Plus™ is safe for all clearcoat, enamel, acrylic, lacquer, and single-stage paints.


RECOMMENDED USE:
Power Cut Plus™ will perform best at low speeds, between 1,400 and 2,400 rpm with a wool pad. Only moderate-to-medium pressure should be applied to the buffer. Buff in small areas, (2' X 4' area). Power Cut Plus™ and a foam cutting pad also work well at 1,200 to 1,400 rpm. 1000 grit sandpaper marks can also be removed with Power Cut Plus™.

FOLLOW-UP PRODUCTS: Always use a polish after compounding. #76 GS-1 with a wool pad followed by #22 Wet Wax® works great. Another great combination is #78 BC-2 with a wool pad followed by #75 White Magic. For the body shop, use #77 BC-1 or #50 New Car Glaze for your polish.

HELPFUL TIPS: Use #49-Body Shine® to keep surface of the paint cool and wet. This procedure will reduces swirls and enhance the product's performance. Apply enough product between the pad and the paint to allow you to use or work the product "wet".

ABRASIVE METER: The Auto Magic® Abrasive Meter is an exclusive quick reference guide to the aggressive nature of products in the Waxes, Glazes & Compounds category. Products listed in the green area are mostly waxes or sealants and are not aggressive. Products in the yellow area contain mild abrasives. Compounds are the most abrasive and are located in the red zone.


© 2000 Auto Wax Company, Inc. 1275 Round Table Drive, Dallas, Texas 75247  800-826-0828               Jan. 2001

 

Product Training Bulletin