 |
 |
 |
|
| Home I Products I New Products I Buy 16 Oz. I Accessories I Distribution I Regional Support I Wall of Fame I Tradeshows I E-Mail Us |
|
| TYPE
A
CONDITION:
New or used paint that has superficial to light scratches and/or surface contaminants |
Repair | Products
used for the repair |
Follow-up products |
|
Step
1: Remove surface level contaminants from the painted surface. |
#CM2200 Clay Magic® & #49-Body Shine® |
go to step 2 |
| Step 2: Hand wax, foam pad buff or orbital polish at low rpm. |
#22 Wet Wax®, #75 White Magic®, #78 BC-2, #79 Awesome Gloss |
none |
|
TYPE B
CONDITION:
New or used paint that has light to medium scratches, oxidation, and/or surface contaminants |
Repair | Products
used for the repair |
Follow-up products |
|
Step
1: Remove surface level contaminants from the painted surface. |
#CM2200 Clay Magic® & #49-Body Shine® |
go to step 2 |
|
Step 2: Buff with yellow foam pad or wool pad |
#50
New Car Glaze, #76 GS-1, #77 BC-1, #78 BC-2, #88 XP-Polish |
go to step 3 | |
| Step 3: Select a wax to protect the polished surface. Apply by hand or buffer with finishing pad |
 |
#22
Wet Wax®, #75 White Magic®, #78 BC-2, #79 Awesome Gloss |
|
TYPE C
CONDITION:
Used paint that has heavy scratches, spotting, 1200-2000 grit sandpaper marks, and/or surface contaminants |
Repair | Products
used for the repair |
Follow-up products |
|
Step
1: Remove surface level contaminants from the painted surface. |
#CM2200 Clay Magic® & #49-Body Shine® |
go to step 2 |
|
Step 2: Compound with a wool pad or by hand |
#110
Power Cut Plus, #87 XP-Compound |
go to step 3 | |
| Step 3: Always polish after compounding. Use a foam or wool pad, or by hand |
|
#50
New Car Glaze, #76 GS-1, #77 BC-1, #78 BC-2, #88 XP-Polish |
|
| Step
4: (optional) Select a wax to protect the polished surface. Apply by hand or buffer with finishing pad |
|
#22
Wet Wax®, #75 White Magic®, #78 BC-2, #79 Awesome Gloss |
|
TYPE D
CONDITION:
Used paint that has severe scratches, spotting, peeling, and/or clear coat damage |
Repair | Products
used for the repair |
Follow-up products |
|
When
the damage is beneath the clear coat or single stage paint,
then the surface will need refinishing (repainting). In some cases, the damage can be repaired by refinishing only the clear coat. If more than .5 mil of material is removed without going down to the base coat, clear coat can be applied by itself. |
seek a body shop | N/A |
| Copyright© 2000
All Rights Reserved. Auto Wax Company, Inc. 1275 Round Table
Dr. Dallas, TX 75247 (800) 826-0828 (214) 631-4000 (214) 634-1342 FAX contact us: info@autowaxcompany.com
|
